The RDM Responder Tests are an automated testing suite for RDM Responders. Testing RDM Responses previously involved connecting an RDM Controller and sending commands to the responder, verifying the behavior matched what was expected. This can be a time consuming process and many of the corner cases aren’t exercised.
The RDM Responder Tests automate all of this and provide a detailed breakdown of how well a responder complies with the E1.20 (RDM) standard. This saves time during the product development process and raises the quality of RDM implementations across the industry.
Reference : https://www.openlighting.org/rdm-tools/rdm-responder-tests/
------------------- Summary --------------------
OLA Version: 0.10.5
Test Run: 2018-02-03 06:09:38 PM
UID: 7ff0:ebf43844
Manufacturer: http://www.raspberrypi-dmx.org
Model Description: Pi Zero 512MB V1.2
Software Version: 1517676201
------------------- Warnings --------------------
------------------ Advisories -------------------
SET POWER_STATE was write protected, try changing the lock mode if enabled
SET DEVICE_HOURS was write protected, try changing the lock mode if enabled
SET DEVICE_HOURS was write protected, try changing the lock mode if enabled
----------------- By Category -------------------
Configuration: 8 / 8 100%
Control: 22 / 22 100%
Core Functionality: 4 / 4 100%
DMX512 Setup: 24 / 24 100%
Dimmer Settings: 13 / 13 100%
Display Settings: 2 / 2 100%
Error Conditions: 164 / 164 100%
IP and DNS Configuration: 5 / 5 100%
Network Management: 24 / 24 100%
Power / Lamp Settings: 8 / 8 100%
Product Information: 19 / 19 100%
RDM Information: 0 / 0 -%
Sensors: 8 / 8 100%
Status Collection: 3 / 3 100%
Sub Devices: 65 / 65 100%
Unclassified: 1 / 1 100%
-------------------------------------------------
370 / 426 tests run, 370 passed, 0 failed, 0 broken