Search this site
Skip to main content
Skip to navigation
Open Source Pi DMX-512, Art-Net 4, sACN E1.31, RDM, Pixels, MIDI, SMPTE & OSC
Orange Pi
Contact
Displays
User Defined Format
External links
GPIO Header
MIDI board
Network configuration
Ethernet
Wifi
Updating Wifi firmware
RDM
Built-in supported Sensors
Built-in supported Sub-devices
Supported PIDs
Remote Configuration Management for SPI flash
Configuration
Example Java UI
Workflow firmware installation
SPI flash boot process
System time
GPS time configuration
uart0 shell
Front-end Java application
WS28xx/APA102/UCSx903/TLC59711/P9813 configuration
Prototype boards
Multi port pixel prototype boards
4 Output (4x 4 Universes) {For new implementations please use the 8x 4U board}
8 Output (8x 4 Universes)
BOM
Schematic and board
Schematic and board
Single port pixel board (1X 4 Universes)
BOM
How to order @jlcpcb
Schematic and board
Technical details
1. Art-Net 4 Node : DMX / RDM Controller / Pixel Controller
Configuration
Successfully tested
2. sACN E1.3 Bridge : DMX / Pixel Controller
Configuration
Successfully tested
3. OSC Bridge : DMX out / Pixel Controller
Configuration
Successfully tested
4. Orange Pi Zero / Raspberry Pi : DMX USB Pro
Configuration
Firmware
RDM isolated board with USB (FT245RL)
Successfully tested
5. Orange Pi One Real-time Monitor's
Configuration
successfully-tested
6. RDM Responder / Pixel Controller
Configuration
Firmware
OLA RDM Responder Tests
RDM isolated board
Successfully tested
7. MIDI Real-time Monitor
Configuration
Successfully tested
8. DMX Showfile Player
Art-Net Trigger
Configuration
Run-time OSC messages
9. LTC SMPTE Timecode Reader / Converter / Generator
Configuration
Displays
Configuration
MAX7219
RGB Panel
Run-time OSC messages
Run-time UDP messages
WS28xx
7-Segment
Matrix (64x8) 8 characters
Internal TimeCode generator
Buttons
MA2 LUA
Run-time OSC messages
Run-time UDP messages
MIDI System Real-Time messages
Run-time OSC messages
Run-time UDP messages
Schematic, board and BOM
Source selection buttons and rotary
Successfully tested
TCNet
Run-time OSC messages
Run-time UDP messages
Wireshark dissector
C. sACN E1.31 to Art-Net converter
Configuration
Successfully tested
D. Distributed Display Protocol (DDP)
L. Linux Art-Net, sACN, OSC
O. OSC Client
Buttons and led's
Configuration
S. Orange Pi DMX/RDM Stepper Controller
Built-in Operation Modes
Configuration
OLA RDM Responder Tests
Successfully tested
U. Art-Net 4 Node : UART / SPI / I2C
Configuration
RS-232 board (2x RS232)
How to order @jlcpcb
Run-time UDP messages
Z. Allwinner H2+/H3 (sun8iw7p1)
|Archive|
1. Art-Net 3 Node : DMX Out / RDM Controller / Pixel Controller
Configuration
A. Raspberry Pi Linux ArtIpProg
Configuration
Infrared remote control module
Raspberry Pi
Installation
OLA on the Raspberry Pi 3 (Jessie)
Raspberry Pi development environment
Raspberry Pi GPIO header
Videos
Open Source Pi DMX-512, Art-Net 4, sACN E1.31, RDM, Pixels, MIDI, SMPTE & OSC
RDM isolated board with USB (FT245RL)
Jumper 1 (JP2)
The board can be ordered here
http://www.bitwizard.nl/catalog/
Google Sites
Report abuse
Page details
Page updated
Google Sites
Report abuse
