Technical details:
UDP port default : 8000 (0x1F40). See configuration ltc.txt
There are no responses.
Broadcast is supported
Prefix : /<host-name>/tc/
start Starts the TimeCode increments from start_* (see configuration)
stop Stops the TimeCode increments. The TimeCode is still outputting.
resume Continue the TimeCode increments from the 'stop' command.
start/set/hh/mm/ss/ff Sets the start TimeCode. Activated after a Stop / Start.
stop/set/hh/mm/ss/ff Sets the stop TimeCode.
rate/set/rr Sets the rate of the TimeCode. Valid values: 24, 25, 29 and 30.
start/hh/mm/ss/ff Set the running TimeCode
goto/hh/mm/ss/ff Set and jump to the goto TimeCode, but stop the TimeCode incrementing/decrementing.
direction/.. Sets the direction. Valid values: forward and backward
pitch float Sets the pitch. Valid values -1.0 <= float => 1.0
forward int Skip the TimeCode in seconds. Positive values only.
backward int Skip the TimeCode in seconds. Positive values only.
Examples:
oscsend 192.168.2.252 8000 /allwinner_26038E/tc/start/set/10/00/00/00
oscsend 192.168.2.252 8000 /allwinner_26038E/tc/pitch f 0.5